| PLX SPECIFICATIONS | PLX1202 | PLX1602 | PLX2402 | PLX3002 | PLX3402 |
| Watts Stereo Mode (both channels driven) |
|
|
|
|
|
| 8 ohms 20 Hz-20 kHz 0.03% THD | 200W | 300W | 425W | 550W | 700W |
| 4 ohms 20 Hz-20 kHz 0.05% THD | 325W | 500W | 700W | 900W | 1100W |
| 2 ohms 1 kHz 1% THD | 600W | 800W | 1200W | 1500W | 1700W |
| Watts Bridge Mono Mode |
|
|
|
|
|
| 16 ohms 20 Hz-20 kHz 0.01% THD | 400W | 600W | 850W | 1100W | 1400W |
| 8 ohms 20 Hz-20 kHz 0.01% THD | 700W | 1100W | 1500W | 2000W | 2200W |
| 4 ohms 1 kHz 1% THD | 1200W | 1600W | 2400W | 3000W | 3400W |
| Noise (20 Hz-20 kHz) | <-106 dB | <-107 dB | <-108 dB | <-107 dB | <-107 dB |
| Input Sensitivity @ 8 ohms | 1.0 Vrms | 1.2 Vrms | 1.5 Vrms | 1.7 Vrms | 1.9 Vrms |
| Input Sensitivity @ 4 ohms | 0.9 Vrms | 1.1 Vrms | 1.3 Vrms | 1.5 Vrms | 1.7 Vrms |
| Output Circuitry | AB | AB | 2-Step | 2-Step | 2-Step |
| Power Requirements (1/8 power pink noise @ 4ohms) | 6A | 10A | 8A | 10A | 12A |
| All Models | All Models |
| Distortion (SMPTE-IM) | Less than 0.01% |
| Distortion (typical) | Less than 0.01% THD |
| Frequency Response | 20 Hz-20 kHz, ± 0.2 dB/8 Hz-50 kHz, +0, -3 dB |
| Damping Factor | greater than 500 |
| Input Impedance | 6 K ohms unbalanced, 12 K ohms balanced |
| Input Clipping | 10 Vrms (+22dB) |
| Cooling | Variable-speed fan, rear-to-front air flow |
| Connectors (each channel) | Input: 3-pin XLR and 1/4" TRS balanced |
| Amplifier Protection | Full short circuit, open circuit, thermal, ultrasonic, & protection. |
| Load Protection | On/off muting, DC-fault power supply shutdown |
| Dimensions | 19" (48.3cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces), |
| Gain | 40x (32 dB) |
| Weight | 21 lb (9.5 kg) net |